Old D7 available

[magneticanomaly]

My neighbor's old D7 was sold at auction last Saturday, for around $1,000. The buyer is a scrapper, but may sell the thing whole or part it, if the right deal comes along.

I may want the blade, pony carb, and mag if it will otherwise go to scrap.

AFAIK, it runs, or did about five years ago when neighbor bought it.

All I could read of the S/N on right rear corner was 11492

Here are some photos I took this morning

If anyone is interested, I will put you in touch with the buyer

John Leyzorek 3047997191DSCI2004.jpgDSCI2001.jpgDSCI1999.jpgDSCI2000.jpgDSCI1997.jpgDSCI1998.jpgDSCI2005.jpgDSCI2002.jpg

[u-joint]

hate to see that get cut. that is a military machine, the seat is anyway. that plate in the first picture on the side of the seat is made of brass. it gives the shipping specs for the military.

[devan6706]

Do all the 3t d7s have the exact same pony motor?

[u-joint]

i believe the starting engines will interchange from a 7M, 3T, 4T. there are internal differences but the engines will bolt up.

[Old Magnet]

The 1H, 8R, 2U and 13A D8's also use the same pony motor. Just keep track of what you use as there are some internal differences such as bearings.