Results 1 to 7 of 7

Thread: Delco starter interchange

  1. #1
    Join Date
    Nov 2006
    Location
    Faunsdale, AL USA
    Posts
    2,272

    Default Delco starter interchange

    Anyone have any information about Delco starters to say what family or model a 113039 Delco Remy starter is? On the Delco website it says it's obsolete, no other information. I have one we need to find a replacement for. Not expecting a direct replacement, just something that will fit, modern would be nice!
    D2-5J's, D6-9U's, D318 and D333 power units, 12E-99E grader, 922B & 944A wheel loaders, D330C generator set, DW20 water tanker and a bunch of Jersey cows to take care of in my spare time

  2. #2
    Join Date
    Nov 2006
    Location
    Corralitos, Ca.
    Posts
    8,216

    Default

    Do you know the application? and is that all the numbers? Usually Delco uses a 7-digit number.

    I have starter parts listing back to 1934 but it does not show that number.
    Last edited by Old Magnet; 11-14-2011 at 03:56 PM.

  3. #3
    Join Date
    Sep 2009
    Location
    Gilroy, CA
    Posts
    410

    Default

    That starter comes up as a 1113039 on the Remy site and shows obsolete. No other info available.

  4. #4
    Join Date
    Nov 2006
    Location
    Corralitos, Ca.
    Posts
    8,216

    Default

    1113039 is a 6V starter used on IHC power unit #RD450 (1957-58) only. No replacement listed but appears to be one of the early 30MT units of which there are lots to choose from including 12 & 24V.

    If it's just parts you need I can give you the build list. Seems it is the same build as others but there is something different about the solenoid, something to do with a lever??

  5. #5
    Join Date
    Nov 2006
    Location
    Faunsdale, AL USA
    Posts
    2,272

    Default

    It's on an IH power unit. U450 6 cylinder propane/natural gas. Beginning to pull lots of amps when cranking. Has just been in the shop, so I don't think there's much that can be done for it and they generator/starter guy seems not to be able to get anything for it anyway. A year ago he ordered a solenoid and it wouldn't fit.

    There was some talk about using a 30MT or something like that on the Yesterday's tractors discussion board when I searched there today. Sure would be nice if that number would cross over to something new.

    It has 113039 1787 on the tag. It's one with the exposed drive shift linkage/open plunger on the solenoid. I had seen that search result on the Delco website, but didn't catch the extra 1 at the beginning. I wonder how accurate that is because the old one certainly doesn't have that 1 on it. Probably like entering the old CAT parts numbers into the modern system, Have to have the right format.

    Searching with 1113039, I find some foreign language websites that seem to indicate it's a 30MT series. I've got some of those around I can stick in it to see.
    D2-5J's, D6-9U's, D318 and D333 power units, 12E-99E grader, 922B & 944A wheel loaders, D330C generator set, DW20 water tanker and a bunch of Jersey cows to take care of in my spare time

  6. #6
    Join Date
    Nov 2006
    Location
    Corralitos, Ca.
    Posts
    8,216

    Default

    That 113039 doesn't fit anything in the Delco system....most likely miss stamped. I suspect your going to have to swap nose housings as there are lots of different versions.

  7. #7
    Join Date
    Jul 2008
    Location
    ms
    Posts
    92

    Default 1113090

    http://66.46.21.101/RCPOnline/Search...?PART=3600AHDS
    Try Here for parts or starter jw45

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •