Results 1 to 3 of 3

Thread: D330 3304 engine interchangeable?

  1. #1
    Join Date
    Jan 2012
    Posts
    1

    Default D330 3304 engine interchangeable?

    I have a couple of 955Ks, one with the D330, the other with the D330C. Will a 3304 motor fit the bell housing and motor mounts?

  2. #2
    Join Date
    Nov 2006
    Location
    Corralitos, Ca.
    Posts
    7,045

    Default

    Can't tell you the whole story but I looked up the bell housings and the 955L (85J6247-up) with 3304 uses the same number as the earlier L models (85J4672 to 85J6246) with D330c. Housing number 7S7780.

    The 85J's did not use the D330.....all D330c's or 3304's

  3. #3
    Join Date
    Mar 2007
    Location
    Richmond Hill Ontario
    Posts
    602

    Default

    The 3304 and the D330C will interchange fairly easily, the flywheel housing will fit directly. Pay special attention to the back end of the oil galley, some engines have a core plug and others have a button to supply oil to a rear pump drive. The coolant hoses may need some modification, not sure and the fan mount may not be exact. A fan mount from the 955 engine arrangement should fit. Get your engine allignment right or you will rip out the drive biscuits in a week. Also governor should be set to 955 spec's.
    Later Bob

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •