Page 1 of 2 12 LastLast
Results 1 to 10 of 11

Thread: Cat 2 ton need help/info on engine

  1. #1
    Join Date
    Nov 2006
    Location
    Philadelphia, Pennsylvania
    Posts
    11

    Default Cat 2 ton need help/info on engine

    I have a really nice 2 ton cat, with original pressed pads, crossbar steering, air cleaner in tact, etc

    it sat for 3 years inside my barn and now the engine is stuck

    I pulled the pan, put some pressure on the crank with a bottle jack and still nothing. looking up inside #2 cylinder, I can see soem rust on the cylinder walls. I filled the cylinders with diesel fuel and will try to soak it out.

    One of my questions is, if I have to pull the head, where can I get a head gasket set? How about piston rings, assuming they are standard.

    thanks for any help

    by the way, what is the approximate value of the machine today, I paid $3500 for it 3 years ago. ( with engine running)


    Dave Newman

  2. #2
    Join Date
    Nov 2006
    Location
    Philadelphia, Pennsylvania
    Posts
    11

    Default

    the serial # is 78649

  3. #3
    Join Date
    Nov 2006
    Location
    Napa Valley - Newville CA
    Posts
    835

    Default

    Its 1928 vintage one of the last made they stopped at 78989 you can get rings from Hastings I dont have their info and gaskets from Olsen http://www.olsonsgaskets.com/products.html

  4. #4
    Join Date
    Nov 2006
    Location
    Philadelphia, Pennsylvania
    Posts
    11

    Default

    Thanks for the info

    would you have the torque specs for the head bolts?

    also, any idea on value? ( after it is running again)

    Dave

  5. #5
    Join Date
    Dec 2006
    Location
    victoria australia
    Posts
    1,162

    Default Head torque

    Hi Country,
    no specific tensions are given for these units but the attached should help.
    Cheers, and Welcome to the BB.
    Eddie B.
    Last edited by edb; 08-11-2007 at 07:46 PM.

  6. #6
    Join Date
    Nov 2006
    Location
    Philadelphia, Pennsylvania
    Posts
    11

    Default

    Eddie

    thanks for the info

    I have been a memebr for YEARS- mostly jusk lurking

    see if this looks familiar, as I posted it several years ago

    http://www.easternsurplus.net/images/lesnewman.jpg

    Dave
    www.easternsurplus.net

  7. #7
    Join Date
    Nov 2006
    Location
    Pennsylvania
    Posts
    281

    Default

    dave,
    where in philly are you located? I am from this area too, near norristown.

  8. #8
    Join Date
    Nov 2006
    Location
    Philadelphia, Pennsylvania
    Posts
    11

    Default

    I work in Phila near the Tacony Bridge and live in Newtown, Bucks county

  9. #9
    Join Date
    Nov 2006
    Location
    Pennsylvania
    Posts
    281

    Default

    I live over near phoenixville. I am doing a job as we speak in newtown on 413 accross the street from the township building. How many cats do you have?

  10. #10
    Join Date
    Nov 2006
    Location
    Philadelphia, Pennsylvania
    Posts
    11

    Default

    catmatt

    I have the 2 ton, D2- 3J I think, a newer D3C hystat, cletracs: F, K20, 35, E-38, OC6-68, OC3, HG-68, John Deere: 2- MC, 450 loader, Lots of hit and miss and a few wheel tractors, plus a pile of army trucks.

    what do you have?

Similar Threads

  1. Need info on 2 ton spark plugs
    By brewzer in forum DISCUSSION
    Replies: 2
    Last Post: 02-14-2010, 05:38 PM
  2. Cat 2 Ton Info n pix
    By §wishy in forum DISCUSSION
    Replies: 0
    Last Post: 01-22-2010, 10:36 PM
  3. 2 Ton Engine Bolt Torque Values
    By edb in forum DISCUSSION
    Replies: 0
    Last Post: 10-28-2008, 06:13 PM
  4. Engine Info Search D-334 used in GenSet
    By BobD in forum DISCUSSION
    Replies: 5
    Last Post: 11-24-2007, 02:31 PM
  5. Need info on 2-ton
    By Rodten in forum DISCUSSION
    Replies: 0
    Last Post: 01-22-2007, 12:24 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •