Results 1 to 7 of 7

Thread: Dinuba Duo

  1. #1
    Join Date
    Nov 2006
    Location
    Petaluma, California
    Posts
    1,447

    Default Dinuba Duo

    Hey Gang,

    I got to bring a friend, Art Nelson, to go on a tour at the Dinuba Duo's Diamond in the Rough's Palace. John and Mike Boyajian are great people. Down to earth and just great folks. They found a tank for my water truck project turning my 5 ton AutoCar back into one. Mike and John, I unloaded it today and filled it with water. The port hole is leaking a tiny bit, so I'll take the access cover of and reseal it. The rest of the tank is perfect. Not one drip in any of the revited seams. Thank you for finding it for me. I'll pull the flat bed off of "Emitt" (My wife named my '22 AutoCar after Emitt Smith #22) and dry fit the tank @ CatNight on Tuesday Night. Hey if you two want to come up next Saturday, we are having a BBQ for some Cat guys and are going to work on a D8-2u's #25 CCU. We are going to design the water truck too.AutoCar Tank 001.jpgAutoCar Tank 002.jpgAutoCar Tank 007.jpgAutoCar Tank 004.jpgTulare 2012 007.jpgTulare 2012 002.jpg You are welcome to show up. Thanks again, you guys are great.-glen

  2. #2
    Join Date
    Nov 2006
    Location
    Gold Coast, Queensland, Australia
    Posts
    1,075

    Default Lookin' good.

    Hi, Glen.
    Lookin' good. But how are you going to secure a golf cart on top of that to go to shows? LOL. And it woulda got all dirty and muddy down at Tulare and still not been able to give us enough water.

    Hey, M8, would you do me a favor please and see if Oil Slick wuz payin' attention back at Christmas, 2008, when I showed him how to adjust a #25 in the back of the track repair shop at Bakersfield? Help him put it all together and then leave HIM to adjust it - - - - WITHOUT the book, just like I did. Heck, I even pulled the side cover off the blade lift side of his and cleaned things off so that he could see clearly what I was doing before I adjusted it so he'd better have paid attention.

    Just my 0.02.
    You have a wonderful day. Best wishes.

    Deas Plant.

  3. #3
    Join Date
    Dec 2006
    Location
    Wesminster MD
    Posts
    340

    Default sweet load

    Glen love that Dw 6 thats a sweet piece always wanted one of those. Do they bother you about the width or do you have a permit to move it? Jason

  4. #4
    Join Date
    Nov 2006
    Location
    Petaluma, California
    Posts
    1,447

    Default Wide Loads

    Hey Jason,

    Yes, I have wide load and over weight anual permits that cover average loads. Extra big stuff we need to get special permits. -glen

  5. #5
    Join Date
    Mar 2008
    Location
    Dinuba , Ca. 93618-9208
    Posts
    2

    Default Rivited tank

    7upuller

    Glad everything worked out great. Good looking load. Thanks for the invitation.

    John and Mike Boyajian
    California Cast Iron Condors

  6. #6
    Join Date
    Nov 2006
    Location
    Petaluma, California
    Posts
    1,447

    Default Inside Not Seen in Years

    Hey John and Mike,

    Ever seen it from the inside. It's been closed off for years.-glenOil Slick 003.jpgAutoCar Tank 002.jpgAutoCar Tank 004.jpgOil Slick 008.jpg

  7. #7
    Join Date
    Mar 2008
    Location
    Dinuba , Ca. 93618-9208
    Posts
    2

    Default Inside rivited tank

    Hi Glen,

    The tank looks real good inside. The tank looks like it will fit the truck perfect. Looking foward to seeing
    it in action some day.

    John and Mike

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •