Page 1 of 4 123 ... LastLast
Results 1 to 10 of 38

Thread: wanted 212 grader tires 10.00x24

  1. #1
    Join Date
    Mar 2007
    Location
    New Kensington Pa.
    Posts
    75

    Confused wanted 212 grader tires 10.00x24

    any body have 10.00x24 grader tires new or good used need six Thanks

  2. #2
    Join Date
    Mar 2007
    Location
    New Kensington Pa.
    Posts
    75

    Default 212 tires

    Still looking thanks

  3. #3
    Join Date
    May 2010
    Location
    Lycoming County, PA.
    Posts
    331

    Default

    Good luck. I've been looking for 4 of them for several years now. I have found some farm tractor tires that are that size but the tread pattern is typical tractor.
    955H 60A
    212 grader 1R
    Farmall Super A
    Ford 4000 Industrial w/backhoe & loader
    1947 CJ2A
    1950 CJ3A
    1962 WM300 Power Wagon
    Hit & Miss Engines

  4. #4
    Join Date
    Jul 2013
    Location
    Turlock California
    Posts
    32

    Default

    The 10.00 x 24's were correct at the time the grader was manufactured, but this size became officially obsolete in the mid-1950's as tire manufacturers standardized on a lesser number of sizes.

    If you acquire some later parts books, and compare the individual wheel hub/rim part numbers and drawings .. you'll find that either the rim pressing or the wheel hubs were modified in design, when Cat changed over to the 13.00 x 24 tire size.

    From late 1955 to mid-1956, Cat changed over to tubeless tires on all motor graders, wheel tractors, scrapers and wagons. The new tubeless tires required a new three-piece rim with an o-ring seal.
    Earlier model graders, wheel tractors, scrapers and wagons could be retro-fitted with the new tubeless tires, but the new tubeless rims were required as part of the deal.

    You will likely find that the newer rims or hubs have a bigger offset to compensate for the wider tires. The changeover to tubeless tires on the 9T series motor grader came in at S/N 9T4762, in Dec 1955.
    Cat 12 Grader 8T6375
    Cat D8 2U12593

  5. #5
    Join Date
    Jul 2013
    Location
    Turlock California
    Posts
    32

    Default

    Here is a cut & paste from another forum. It's a long shot

    Here's a source for obsolete Cat 212, 10:00 x 24 grader tires. Sent an email to them. Enclosed is a reply.


    www.mcwhortertire.com


    Yes, we stock a Denman brand 12 ply. Your cost is $552 each. I can get you freight pricing if you will give me quantity and zip code.
    Cat 12 Grader 8T6375
    Cat D8 2U12593

  6. #6
    Join Date
    Mar 2008
    Location
    TEXAS
    Posts
    227

    Default 10.00x24 grader tires

    the thread for McWhorter Tires is dated...02-26-2009, 07:54 AM...
    This is an old message...
    The availability of the Denman 10.00x24 tires had gradually dwindled away by the time I searched for them...
    Specialty Tire bought the Denman 10.00x24 tire molds some time ago...,and thought they might make a run of them...Never could get an answer back on this...
    Do a search for the tires and you will find an old thread of mine about the research I have done on the 10.00x24 tires...
    I have a 212 grader that has 11.2x24 AG tires on the front...They are a heavy tread, but work just fine...
    I had 4 212 rims and locking rings sandblasted, primed, and painted...Then found out the rims were about 1 1/2" to narrow in width to accept the 11.2x24 ag tires...The older rims with riveted locking rings can be treacherous when mounting the tires...
    Right now, I'm looking for the newer 24" rims with 2 separate pieces rings...the newer safer ones...like used on CAT 112 graders...There are 3 separate part numbers for these...I need 4...
    Respy, CarlsCat
    Last edited by CarlsCAT; 11-21-2014 at 07:51 PM.

  7. #7
    Join Date
    Mar 2007
    Location
    New Kensington Pa.
    Posts
    75

    Default 212 tires

    Still looking!!!!

  8. #8
    Join Date
    Dec 2009
    Location
    Oregon
    Posts
    119

    Default Denmans tires

    I was at a local dealer last winter, having studded tires put on wifes car and found two new Denman 10.00x24 grader tires. I bought a lottery ticket on the way home but with no luck!! If I find more I will let you know. Scott

  9. #9
    Join Date
    Dec 2006
    Location
    victoria australia
    Posts
    2,448

    Default 24" Tyres

    Hi Team,
    back in the day, mid 1960's, at The Dealer we used to have the front hubs machined to suit the 13.00 x 24" Rear Rims and then the unit had the same sized tyres and rims all around.

    This was necessary even way back then as here in Australia by the mid 1960's the 10.00 x 24" Tyres were hard to get and not being made anymore.
    Most customers only wanted to handle one size of spare wheel anyway.

    Cheers,
    Eddie B.

  10. #10
    Join Date
    Oct 2011
    Location
    Corryong Vic Australia
    Posts
    564

    Default

    Have never tried it, however have always thought there was a possibility of fitting 10.00 x 24.5 truck tyres with tubes. Has anyone tried to do this, could get a mutton leg Bandag cap fitted to the tyres here in Australia if they would fit ok.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •