Results 1 to 3 of 3

Thread: D2 pony

  1. #1
    Join Date
    Nov 2012
    Posts
    43

    Default D2 pony

    How tight to tighten the end plate bolts in back of the fly wheel? I was told they can be to tight. Thanks in advance. Also should I put any cement on the new gasket?

  2. #2
    Join Date
    May 2007
    Location
    Northern Victoria, Australia
    Posts
    2,636

    Default

    From memory they are 1/4" or 5/16" those bolts, torque spec for 1/4" is 8-11 foot pounds, 5/16" is 12-16 foot pounds, in theory new Cat gaskets do not need any gasket goo, if you want to be 110% certain then put some on.
    Regards
    Mike

  3. #3
    Join Date
    Nov 2012
    Posts
    43

    Default

    Thanks a lot Mike, I now hope to get this pony running soon.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •