Results 1 to 9 of 9

Thread: D6D Forward speeds in MPH

  1. #1
    Join Date
    Nov 2006
    Location
    Denair,California
    Posts
    140

    Default D6D Forward speeds in MPH

    Does anyone know what the six forward speeds are of a D6D 5X with transmission group number 1P1947
    Attached Images Attached Images

  2. #2
    Join Date
    Nov 2007
    Location
    NW Ohio
    Posts
    2,639

    Default

    3X shows 2.5 for 1st, 2.7 for 2nd, 3.5 for 3rd, 4.9 for 4th, 6.9 for 5th
    There is also a D6G SR [Super Rural] 216hp, 1900 rpm 3306, gears 1-2-6 121 dbhp on firm soil and gears 3-4-5 170 dbhp on firm soil. Gross hp 172 and 234 hp
    1.9 1st, 2.7 2nd, 3.8 3rd, 4.3 4th, 4.8 5th, 5.8 6th
    Last edited by Rome K/G; 10-12-2018 at 06:25 PM.

  3. #3
    Join Date
    Nov 2006
    Location
    Denair,California
    Posts
    140

    Default

    Thanks Rome.Not the same transmission but I'm willing to bet 1st in the 5X is faster than 2.5.Been pulling a chisel in hard ground and wish it was geared slower.Forgot how to figure distance traveled to get MPH

  4. #4
    Join Date
    Mar 2009
    Location
    yuba city,california
    Posts
    900

    Default

    Quote Originally Posted by gary in CA View Post
    Thanks Rome.Not the same transmission but I'm willing to bet 1st in the 5X is faster than 2.5.Been pulling a chisel in hard ground and wish it was geared slower.Forgot how to figure distance traveled to get MPH
    Hey Gary! Letís see some action photos! That 6 should run away with a chisel.
    Are there any smartphone Apps that you could use while driving? I will see if I can find a D6D spec book.

  5. #5
    Join Date
    Nov 2006
    Location
    Denair,California
    Posts
    140

    Default

    Hi Juiceman,this ripper/chisel was not made for a 6D.Already broke one shank and afraid of scattering iron. You are in luck,I did get a video.

    https://www.youtube.com/watch?v=OY1HHRI7zp0


    But in all fairness,it looks like the shank had been cracked for a while
    Attached Images Attached Images
    Last edited by gary in CA; 10-12-2018 at 08:23 PM.

  6. #6
    Join Date
    Mar 2009
    Location
    yuba city,california
    Posts
    900

    Default

    Iíve got a nice Murray 3 shank I will sell you to make the 6 sweat a little.....
    Almost indestructible. Nice video btw.

  7. #7
    Join Date
    Nov 2006
    Location
    Denair,California
    Posts
    140

    Default

    Thanks Juiceman

  8. #8
    Join Date
    Nov 2006
    Location
    Denair,California
    Posts
    140

    Doh

    OK,I have the speeds.They were right in front of me the whole time Speeds are at 2200 RPMs

    1st 2.8
    2nd 3.3
    3rd 3.8
    4th 4.4
    5th 5.1
    6th 6.1

    In my opinion 4th would be 6th and have a couple of lower gears. 5.1 and 6.1 is too fast

  9. #9
    Join Date
    Nov 2007
    Location
    NW Ohio
    Posts
    2,639

    Default

    Ok, lol, I'm glad you got shift together Gary!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •