Results 1 to 2 of 2

Thread: HT 4 Question

  1. #1
    Join Date
    Nov 2006
    Location
    Kittanning, Pa.
    Posts
    108

    Confused HT 4 Question

    Is it possible to remove the highlift frame, lift arms & bucket assembly as one piece. Need to work on or change motor. Bearing cuttings in oil filter & losing oil pressure. Thanks for any ideas. Jack
    D4D D65R D73T 933C HT4 955H Gardner Denver comp.318 Cat.

  2. #2
    Join Date
    Apr 2014
    Location
    SW MN
    Posts
    96

    Default

    Quite a undertaking. Know a guy who overhauled one through the side cover. You'll want to get the lift arms up out of your way. Probably drop the track on the left also for more working room. (its only a $20 pin)
    Most of the lower bolts that hold the frame to the hardbar and rear trackrame wont be fun.
    If you have something big to lift with it is doable as I have fitted a t4 frame to a d4
    T4, T6, HT4's, 3t D7, 944, Super Mogul

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •