d6 9u governor rebuild

[dblaz18]

I'm trying to figure out what parts wear and need replaced I know the spring and I checked with cat its discontued but what else in there needs replaced any help would be greatly appreciated thank you Dave

[bob]

A guy down in Mo. just did his governor, can't remember his handle maybe yellercat.
Later Bob

[SJ]

Usually if it,s got lots of hours on it the weight rollers get flat spots on them and sometimes the pin in them and the weights themselves pins and bushings get worn and the bearing on the end of the shaft in there. It,s almost a seek and find just what parts are worn if your doing a complete overhaul. The best spring I found for them is a 5F 6413 and also other engines with the style gov. that uses that type spring.The idles, high and low will need to be checked esp. with a new spring.I have rebuilt a truck load of governors and that spring worked the best for power and found that out from one of our older engine mechanic.

[dblaz18]

No springs are available from cat anymore any suggestions where to find one

[Kelly]

db1az18,
What is the Sn of your D6-9U?
Kelly

[dblaz18]

It is 9u12844

[jw45]

heavy quip