acmoc

ACMOC Membership Benefits

  • FREE quarterly magazine filled with content about antique Caterpillar machines
  • FREE classified listings
  • ACMOC store discounts and specials
  • Full Bulletin Board Access
    • Marketplace (For Sale/Wanted)
    • Technical Library
    • Post attachments

$44 /year ELECTRONIC

$60 /year USA

$77 /year International

Fuel guage

More
17 years 2 months ago #2161 by yellercat
Replied by yellercat on topic Many thanks
'Mag' -
Many thanks from me, (and all the other BB members who will print and 'archive' on their own), for the professional quality information on this item; along with the other information that you so freely put out for all of our use and enjoyment! You are doing more than your share to keep our hobby alive. We appreciate you time and efforts!
yellerc@

D6-9U

Please Log in or Create an account to join the conversation.

  • ag-mike
  • ag-mike's Avatar
  • Visitor
  • User
17 years 2 months ago #2162 by ag-mike
Replied by ag-mike on topic Fuel guage
i have some s/steel strips sheared and plan on making gauges for the d2 and d4 seat and fender tanks, i been thinking about how to mark them, stamp or etching. remember these are only 5/16 wide. i used 18 gauge material. the stamps i got are to big and i ain't got a etcher yet.

Please Log in or Create an account to join the conversation.

More
17 years 2 months ago #2180 by Old Magnet
Replied by Old Magnet on topic Fuel guage
Here are the fuel guage dimensions for the D4 seat and side tank models.

Please Log in or Create an account to join the conversation.

More
17 years 2 months ago #2423 by ttman4
Replied by ttman4 on topic Yup, you're a keeper....
Old Magnet, you're kinda handy to have around! :D :D
I saved all these fuel dipstick dimensions & printed off the D6 one I needed.
Thanks
Gets scary guessing fuel level on an oddball shaped tank!
BTW, finally got all signed up all legal like over here @ACMOC.
Looks like a pretty good place too!!:)

~and this too shall pass~
D6 9U6914SP, #46Hyd 1W523, 6A dozer #16C5869
R945B Liebherr Ex. (part owner)

Please Log in or Create an account to join the conversation.

More
17 years 2 months ago #2426 by Old Magnet
Replied by Old Magnet on topic Fuel guage
Hi ttman4,
Glad to see you finally made it over here:D :D
Kinda lonesome over there at YTD.

Please Log in or Create an account to join the conversation.

More
17 years 2 months ago #2433 by kenmcal
Replied by kenmcal on topic Fuel guage
Joe: I have a good idea. Pay the postage and I will send you one. I have two of them in old fuel tanks out back. :D

Ken

Please Log in or Create an account to join the conversation.

More
17 years 2 months ago #2437 by Steve51
Replied by Steve51 on topic Fuel guage
It would be reall nice to have an archive section with all this valuable information available. I am new at playing around with these old caterpillars, and I am learning a lot from the discussions on the board, but when I try to remember some information that was posted in the past, it take much more time than if it was in a seperate location.
thanks,

Steve

Please Log in or Create an account to join the conversation.

More
17 years 2 months ago #2460 by ttman4
Replied by ttman4 on topic Archive section

It would be reall nice to have an archive section with all this valuable information available. I am new at playing around with these old caterpillars, and I am learning a lot from the discussions on the board, but when I try to remember some information that was posted in the past, it take much more time than if it was in a seperate location.thanks,Steve

Yes, I second an Archive Section. I'm really new here, dumber than a box of rocks, know not nearly enough about Cats, & sure don't have any right bossing you'all round demanding an Archive or Tec Section, but a Tec Section sure be nice!!:D:D
Couple other forumns I'm on for last couple year have slowly put together a TEC. SECTION & I've found tips, ideas, & things in them that I had no idea even existed....

Old Magnet, Yup, glad to be here. So far looks like a really friendly, informative site. Everybody seems to be helpful.
Couple other sites I'm on (trucks etc) are really good....no flaming & no "put-downs".....just information along with some goodnatured, big time ribbing. Then there are some sites where seems that everybody wants to "rag & putdown" everybody else..... & times-a-wasting:eek: :eek:

Way I see it, since I'm gonna live to be 150, I'm still not gonna live long enough to learn & do everything I want to!!!

BTW, if you'all don't believe the "live to be 150" part, just hang round & see for yoself!!!
BTW #2, I walk the straight & narrow, salt of the earth, pillar of the community, and always tell some little variation of the truth...:D :D

~and this too shall pass~
D6 9U6914SP, #46Hyd 1W523, 6A dozer #16C5869
R945B Liebherr Ex. (part owner)

Please Log in or Create an account to join the conversation.

Time to create page: 0.164 seconds
Go to top