acmoc

ACMOC Membership Benefits

  • FREE quarterly magazine filled with content about antique Caterpillar machines
  • FREE classified listings
  • ACMOC store discounts and specials
  • Full Bulletin Board Access
    • Marketplace (For Sale/Wanted)
    • Technical Library
    • Post attachments

$44 /year ELECTRONIC

$60 /year USA

$77 /year International

D4 steering clutch tools??

More
1 year 7 months ago #239600 by GrantJ
Several months ago I purchased a tool to release the spring pressure on the steering clutches for disassembly. I thought that there was a video on how to do it (safely) but I cant find it now. Any suggestion on information on using the tool???             Thanks,  Grant.

Please Log in or Create an account to join the conversation.

More
1 year 7 months ago #239601 by bruce oz
Replied by bruce oz on topic D4 steering clutch tools??
The following user(s) said Thank You: steve_s

Please Log in or Create an account to join the conversation.

More
1 year 7 months ago #239604 by GrantJ
Replied by GrantJ on topic D4 steering clutch tools??
Thanks Bruce, I have watched a lot of his videos, but managed to miss this one. I will watch the whole thing tonight. Grant.
The following user(s) said Thank You: bruce oz

Please Log in or Create an account to join the conversation.

More
1 year 7 months ago #239616 by trainzkid88
the time factor dont underestimate it. sometimes the best thing is to walk away

Please Log in or Create an account to join the conversation.

More
1 year 7 months ago #239617 by neil
Replied by neil on topic D4 steering clutch tools??
Grant, I just put the clutch in the press and pressed down on the tool to compress the springs, enabling removal of the cotters. It was easy. If you want to do it while the clutch is installed on the tractor, you could probably rig a hole ram with the center bolt to press down on the plate. Probably would need a suitable clearance adaptor so you can get in there to remove the cotters.

Cheers,
Neil

Pittsford, NY

Please Log in or Create an account to join the conversation.

Time to create page: 0.139 seconds
Go to top