I have a set of tracks and rollers from an old RD-6 that I parted out. Number on the rails is 5B3294M1, measure 3-5/8" tall, 6-3/4" pitch, 35 links each, 16" pads. Wear on them is minimal. I have a lot of pics I can email upon request. I have 7 rollers, 4 are excellent condition, 3 have the inside ring worn off. $1000.00 for both tracks, $500 for all 7 rollers, or $1200.00 for all.
I also have the hydraulic pump from the tractor. Mounted on the front lower radiator housing. $350.00. Pics of it available also. Items are near Springfield Missouri.

I believe you have 4 double flange rollers and 3 single flange rollers. They are made like that and are installed in a staggered position on the track frame.

Should be a nice deal for somebody with an RD6 and possibly fit later or other tractors.

"d9gdon" wrote:

I believe you have 4 double flange rollers and 3 single flange rollers. They are made like that and are installed in a staggered position on the track frame.

Should be a nice deal for somebody with an RD6 and possibly fit later or other tractors.

will these fit a d7 3t cat

Please give me a call, I am interested in looking at what you have.
417-736-3774 Thanks, Dale.

ibrooks,
No go on a 3t which is 8.00" pitch.

"Old wrote:

ibrooks,
No go on a 3t which is 8.00" pitch.

Thanks alot

Send me an E-mail <a href="mailto:

---

This email address is being protected from spambots. You need JavaScript enabled to view it." target="_blank">

---

This email address is being protected from spambots. You need JavaScript enabled to view it.

---

Bill Walter, kansas City area. Let me know if you have fuel injection components left. Bill Walter