acmoc

ACMOC Membership Benefits

  • FREE quarterly magazine filled with content about antique Caterpillar machines
  • FREE classified listings
  • ACMOC store discounts and specials
  • Full Bulletin Board Access
    • Marketplace (For Sale/Wanted)
    • Technical Library
    • Post attachments

$44 /year ELECTRONIC

$60 /year USA

$77 /year International

For Sale: Misc. OLD Cat parts.

More
10 years 10 months ago #87365 by ob98
Replied by ob98 on topic Thanks again!

Keith, this item is for the earlier D311, D315, D318 water pumps originally for marine applications. This seal was used with a brass impeller. I have one of these units in a motor I rebuilt many years ago. The item was well used but still holding coolant. The motor had been originally for marine use but it was changed to be a power unit for a crane. Thre were many other items on the motor that were brass. Cheers, Larry.
PS. this style has not been used for years as you cannot get a brass impeller anymore, at least to my knowledge.


Thanks again for the great information, Larry. I am sure someone out there would love to have this seal!

Please Log in or Create an account to join the conversation.

More
10 years 10 months ago #87391 by ob98
18. Drive coupling from a Fairbanks Morse model FMJ. It may fit other applications. It is marked 35 degrees; the impulse dogs move freely; spring is good; includes a nut, washers and woodruff key. Not cleaned or oiled. $6.00. I have a few other small items from this mag also so ask if you need any other part from a FMJ magneto. Thanks.
Attachments:

Please Log in or Create an account to join the conversation.

More
10 years 10 months ago #87395 by ob98
19. I have 25 of these seals for Cat engine precombustion chambers. Sell all for $15.00. Thanks.
Attachments:

Please Log in or Create an account to join the conversation.

More
10 years 10 months ago #87506 by woodster
Replied by woodster on topic water pump bellows seal

12. Cat. p/n 6H3491 for a water pump bellows seal. Fits a lot of engines; D343, D346, D349, D379B, D398B, D399, G342, G353, G398 etc. $20.00


i would like to buy that seal 6H3491

<a href="This email address is being protected from spambots. You need JavaScript enabled to view it." target="_blank">This email address is being protected from spambots. You need JavaScript enabled to view it.

Please Log in or Create an account to join the conversation.

More
10 years 10 months ago #87513 by ob98
Replied by ob98 on topic PM Sent
Thanks, I sent you an email with details.

Please Log in or Create an account to join the conversation.

More
10 years 10 months ago #87853 by ob98
I cant read the last digit of the part number on this piston. It is either 2f3668 or 2f3669? The piston has not been used but has suffered from poor storage and has a couple of damaged spots. I have photographed the worst one. The damage can probably be smoothed out to make the piston seviceable. It is a little over 3" in diameter (3 1/16"); a little over 3 3/4" in heigth (3 13/16") and the pin hole is centered top to bottom and is 13/16" diameter. Current retail is over $90.00. Sell for $5.00 plus the shipping. Thanks.

Attachments:

Please Log in or Create an account to join the conversation.

More
10 years 10 months ago #88033 by ob98
Replied by ob98 on topic No longer available.
All the items are gone, thanks.

Please Log in or Create an account to join the conversation.

Time to create page: 0.188 seconds
Go to top