acmoc

ACMOC Membership Benefits

  • FREE quarterly magazine filled with content about antique Caterpillar machines
  • FREE classified listings
  • ACMOC store discounts and specials
  • Full Bulletin Board Access
    • Marketplace (For Sale/Wanted)
    • Technical Library
    • Post attachments

$44 /year ELECTRONIC

$60 /year USA

$77 /year International

Wanted: Electric start set up for D47U Pony Motor

More
10 years 8 months ago #89398 by D4bob
For some time now I've been looking for the electric start set up for the pony motor on my D47U.

I believe (don't know for sure) a different fire wall is needed as well.

Anyone know where I could get the complete set up?

I have the twin pulleys on the pony crank. One for the V belt and one for the rope pulley that I use now. Arm is getting old and tired, looking for a button to press.

D4Bob
East Coast Australia

Please Log in or Create an account to join the conversation.

More
10 years 8 months ago #89404 by Inter674
best of luck finding one - I tried for a year, was promised one by the local Cat wrecker Dave T, but one never turned up:(.

I ended up fitting a starter generator - the type used on golf carts - which I bought from fleabay for 170, made a bracket, bought a belt, fitted a battery into a steel box and a regulator and solonoid, key ignition switch, couple of leads and Bob's your uncle. Just in case you get stuck, there is another solution....not genuine I know, but it cost little and can easily be removed for the purist purchaser down the track, and does not require the bulkhead to be cut.

Please Log in or Create an account to join the conversation.

More
10 years 8 months ago #89408 by STEPHEN
D4bob, you need a flywheel with 3 grooves, one for the rope, one for the elec start and one for the gov.

Please Log in or Create an account to join the conversation.

More
10 years 8 months ago #89552 by dannygcat
Try Zimmerman Tractor in Versailles, MO (573) 378-7210. Seldom (if ever) mentioned on this site but have a lot of Cat parts. www.crawlerbulldozer.com

Please Log in or Create an account to join the conversation.

Time to create page: 0.137 seconds
Go to top