- Posts: 2344
- Thank you received: 128
ACMOC Membership Benefits
- FREE quarterly magazine filled with content about antique Caterpillar machines
- FREE classified listings
- ACMOC store discounts and specials
- Full Bulletin Board Access
- Marketplace (For Sale/Wanted)
- Technical Library
- Post attachments
$44 /year ELECTRONIC
$60 /year USA
$77 /year International
Wanted: G4600 engine
2 years 6 months ago #232336
by Bruce P
Wanted: G4600 engine was created by Bruce P
Searching for a G4600 gas engine. They were in the gas version of the early No 12 graders. Any help appreciated.
Thanks
Bruce P.
Thanks
Bruce P.
Please Log in or Create an account to join the conversation.
2 years 6 months ago #232341
by neil
Cheers,
Neil
Pittsford, NY
Replied by neil on topic Wanted: G4600 engine
This sounds like the start of another project? We're all ears! : ) I'm a huge fan of big gas engines (like biggastractor) so will be following closely
Cheers,
Neil
Pittsford, NY
The following user(s) said Thank You: Fat Dan
Please Log in or Create an account to join the conversation.
2 years 6 months ago #232344
by Bruce P
Replied by Bruce P on topic Wanted: G4600 engine
Hi Neil. I’m fixing to build an R6. I’ve got a real nice early 4R to use as my chassis.
BP.
BP.
The following user(s) said Thank You: Fat Dan
Please Log in or Create an account to join the conversation.
2 years 6 months ago #232354
by daron
Replied by daron on topic Wanted: G4600 engine
Bruce-
Tom Madden may have one. He had a 12 with one.
Daron
Tom Madden may have one. He had a 12 with one.
Daron
The following user(s) said Thank You: Fat Dan
Please Log in or Create an account to join the conversation.
2 years 6 months ago #232355
by neil
Cheers,
Neil
Pittsford, NY
Replied by neil on topic Wanted: G4600 engine
Nice! I think the hardest part on one of those is finding an exhaust manifold in good shape is it? I look forward to hearing that pulling your plow : )
Cheers,
Neil
Pittsford, NY
The following user(s) said Thank You: Fat Dan
Please Log in or Create an account to join the conversation.
2 years 6 months ago #232357
by Bruce P
Replied by Bruce P on topic Wanted: G4600 engine
Bruce-
Tom Madden may have one. He had a 12 with one.
Daron
Thanks Daron. Tom did have one, it now resides in Elklander. Iowa.
BP
Please Log in or Create an account to join the conversation.
2 years 6 months ago #232359
by Bruce P
Replied by Bruce P on topic Wanted: G4600 engine
Yeah I suppose manifolds are going to be a mess no matter what by now. That one Tom had, it had real nice manifolds. I’ve built manifolds before, I guess I can do it again.
I wonder what ever happened to the one Dandy Dave had?
I wonder what ever happened to the one Dandy Dave had?
The following user(s) said Thank You: Fat Dan
Please Log in or Create an account to join the conversation.
2 years 6 months ago #232381
by neil
Cheers,
Neil
Pittsford, NY
Replied by neil on topic Wanted: G4600 engine
Bruce, you could try Jeff Huff over this way in Honeoye NY. He has a ton of old junk in his yard and could well have one of these. I don't know if he sells his stuff though, outside of the museum auction he had a couple of years ago.
Cheers,
Neil
Pittsford, NY
The following user(s) said Thank You: Fat Dan
Please Log in or Create an account to join the conversation.
2 years 6 months ago #232383
by Bruce P
Replied by Bruce P on topic Wanted: G4600 engine
Thanks Neil, do you have any contact info for Jeff?
Please Log in or Create an account to join the conversation.
2 years 6 months ago #232393
by neil
Cheers,
Neil
Pittsford, NY
Replied by neil on topic Wanted: G4600 engine
Here you go Bruce. Jeff has a phone permanently attached to his ear so don't be surprised if it takes a bit to get hold of him : )
Huff Equipment Co. P.O. Box 100 8919 W. Main Street Honeoye, NY 14471 E-mail: This email address is being protected from spambots. You need JavaScript enabled to view it. Phone: (585) 229-5186 Fax: (585) 229-5985
D4Angelo and I took a good walk around his boneyard to look at all the treasure and poor old Angelo's eyeballs were spinning after an hour or so
Huff Equipment Co. P.O. Box 100 8919 W. Main Street Honeoye, NY 14471 E-mail: This email address is being protected from spambots. You need JavaScript enabled to view it. Phone: (585) 229-5186 Fax: (585) 229-5985
D4Angelo and I took a good walk around his boneyard to look at all the treasure and poor old Angelo's eyeballs were spinning after an hour or so
Cheers,
Neil
Pittsford, NY
Please Log in or Create an account to join the conversation.
Time to create page: 0.178 seconds
ACMOC
Antique Caterpillar Machinery Owners Club
1115 Madison St NE # 1117
Salem, OR 97301
cat@acmoc.org
Become a Member!
"I became a member recently because the wealth of knowledge here is priceless."
- Chris R
"I also joined a year ago. had been on here a couple of times as a non-member and found the info very helpful so I got a one year subscription (not very expensive at all) to try it out. I really like all the resources on here so I just got a three year. I think its a very small price for what you can get out of this site."
- Jason N