Results 1 to 3 of 3

Thread: caterpillar 22 gaskets and engine parts

  1. #1
    Join Date
    Dec 2008
    Location
    charlotte tn
    Posts
    12

    Default caterpillar 22 gaskets and engine parts

    does any one know where i can find the nec. gaskets and engine parts to rebuild a 22 engine.. i emailed olsons gaskets and did not get a reply . im getting a cat 22 this week end and going to restore it. i had very little trouble with the d2 5u, but this is going to be a little more difficult to to find parts i realize.. are the engine bearings poured babbit or incerts ? any help would appreciated . thanks , mike...

  2. #2
    Join Date
    Dec 2006
    Location
    Wesminster MD
    Posts
    365

    Default

    Hi Michael sometimes it takes a while for olsons to reply but that will be your best bet but I have seen another source for gaskets popping up on engine ads and other places will have to nail them down as for the bearings yes theey are babbit and you can get those redone if need be but if they are in good shape just check the clearance an use them over. You can get rings from the Hastings corp. if you need them. Parts arn't to bad for a 22 as they were a very high production tactor and very popular. Hope this helps Jason

  3. #3
    Join Date
    Dec 2008
    Location
    charlotte tn
    Posts
    12

    Default gaskets and bearings

    thanks. i called olsons, and they never recieved my email. thay have all the gaskets i will need . mike..

Similar Threads

  1. Caterpillar ten and Fifteen Parts/machines
    By Catmatt in forum DISCUSSION
    Replies: 3
    Last Post: 01-07-2012, 01:21 PM
  2. Source For Used Caterpillar Parts
    By CarlsCAT in forum DISCUSSION
    Replies: 0
    Last Post: 02-09-2010, 09:20 PM
  3. gaskets and gaskets ugh...
    By abram in forum DISCUSSION
    Replies: 12
    Last Post: 11-23-2008, 08:47 PM
  4. Classic Caterpillar parts
    By MARTYN WILLIAMS in forum DISCUSSION
    Replies: 6
    Last Post: 11-06-2008, 04:17 AM
  5. Caterpillar D2 Parts
    By MARTYN WILLIAMS in forum DISCUSSION
    Replies: 2
    Last Post: 11-29-2007, 02:46 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •