acmoc

ACMOC Membership Benefits

  • FREE quarterly magazine filled with content about antique Caterpillar machines
  • FREE classified listings
  • ACMOC store discounts and specials
  • Full Bulletin Board Access
    • Marketplace (For Sale/Wanted)
    • Technical Library
    • Post attachments

$44 /year ELECTRONIC

$60 /year USA

$77 /year International

212 Grader Serial Number---what year??

More
16 years 6 months ago #10058 by LeakyBoot
9T 2794

Hauled the grader the 50 miles home yesterday. Unloaded and gave it a try on some washed out road. Works very well. Even brakes work. Main problem is they stopped using the pony a few yrs ago because generator went out. From then, they just pulled it to start. I hope to get the pony back going. I didn't know how I'd like the mechanical controls instead of Hyd. But they work super good and smooth. When time permits will see if pony has any fire at the plugs and go from there. LB

Please Log in or Create an account to join the conversation.

More
16 years 6 months ago #10059 by Old Magnet
I show it as a 1951 model.

Please Log in or Create an account to join the conversation.

More
16 years 6 months ago #10066 by gwhdiesel75
The 212 is a nice little grader. Glad your's works so well. Good luck with it. GWH

Please Log in or Create an account to join the conversation.

More
16 years 6 months ago #10095 by LeakyBoot
Replied by LeakyBoot on topic Grader
OK---1951. That's just a spring chicken. I started to do some checking on the pony. Gas tank
rust inside as expected. I removed and put some gravel in it and gave a a period of shaking then cleaned with water hose. If it gives a problem will get a can of coating and do that route. I'm hoping the mag has fire. If not---I bet the points are CAT issue????

Thanks for lookingup the date for me. The hour meter has 700 some hrs on it so guess it may have rolled at 10000. Or not working. Foot petals have very nice tread left so not worn slick. But 700 hrs on a 1951 is too much to hope for.

LB

Please Log in or Create an account to join the conversation.

Time to create page: 0.132 seconds
Go to top