acmoc

ACMOC Membership Benefits

  • FREE quarterly magazine filled with content about antique Caterpillar machines
  • FREE classified listings
  • ACMOC store discounts and specials
  • Full Bulletin Board Access
    • Marketplace (For Sale/Wanted)
    • Technical Library
    • Post attachments

$44 /year ELECTRONIC

$60 /year USA

$77 /year International

brass clutch discs

More
15 years 10 months ago #18186 by D2VERMONT
brass clutch discs was created by D2VERMONT
I have my D2 all torn down in the shop and I want to replace the steering clutches while I am at it. Does any one know where can I get the best price on the brass disks? I also need the part#. If my memory serves me right I need 12 brass disks and 12 steel plates for each clutch so if any one has a good source for the steel plates I would appreciate that as well.


I included a before and after picture and a picture of the instigator in the mysterious lack of power to the left track (if I had only turned up the lock on the cap screw:rolleyes: .


thanks:)
Attachments:

Please Log in or Create an account to join the conversation.

More
15 years 10 months ago #18189 by Old Magnet
Replied by Old Magnet on topic brass clutch discs
Try this site:
www.steeringclutch.com

Please Log in or Create an account to join the conversation.

More
15 years 10 months ago #18193 by bcwayne
Replied by bcwayne on topic brass clutch discs
Here is a pic of the D-2 clutch parts I got from the place OM posted a link to...the parts and service were first rate.

Please Log in or Create an account to join the conversation.

More
15 years 10 months ago #18218 by timbo1946
Replied by timbo1946 on topic brass clutch discs
I got the main clutch from them for my D2 5u. First one was damaged in shipment, they replaced no questions ask. I would do bussiness with them again.
Tim

Please Log in or Create an account to join the conversation.

More
15 years 10 months ago #18249 by D2VERMONT
Replied by D2VERMONT on topic brass clutch discs
Thanks guys :) I feel better now.

Please Log in or Create an account to join the conversation.

Time to create page: 0.146 seconds
Go to top