acmoc

ACMOC Membership Benefits

  • FREE quarterly magazine filled with content about antique Caterpillar machines
  • FREE classified listings
  • ACMOC store discounts and specials
  • Full Bulletin Board Access
    • Marketplace (For Sale/Wanted)
    • Technical Library
    • Post attachments

$44 /year ELECTRONIC

$60 /year USA

$77 /year International

Accessory shaft seal

More
10 months 22 hours ago #251191 by unstyled
I am in need of the accessory shaft seal part number 4B4865 for my 1946 D6 5R that goes in the fuel filter housing. I called Cat parts department yesterday, they said that particular part number is no longer valid/not available but are supposed to get back to me with a replacement part if one is available. I'm not sure if one can or will be found. Does anyone know where I can locate this OEM part? I ordered this seal off the internet from an aftermarket manufacturer a couple weeks ago, it was nowhere near the quality or correct dimensions as the original, which is quite worn out. It was destroyed installing - the diameter was just a little oversize (and cheaply made) I've run into this problem before with non OEM aftermarket parts sometimes. I have googled this part number but found only cheap, overseas aftermarket junk so far. Thanks for any help you can give.

Please Log in or Create an account to join the conversation.

More
10 months 22 hours ago #251194 by bruce oz

Please Log in or Create an account to join the conversation.

More
10 months 21 hours ago #251195 by Old Magnet
Replied by Old Magnet on topic Accessory shaft seal
4B4865 crosses to a National/Federal Mogul/Timken #450171
Plenty of them out there.

Please Log in or Create an account to join the conversation.

More
10 months 19 hours ago #251200 by unstyled
Replied by unstyled on topic Accessory shaft seal
That is the EXACT seal I was referring to. Slightly oversize and cheaply manufactured. The OEM is so much more robust but thanks anyway!

Please Log in or Create an account to join the conversation.

More
10 months 19 hours ago #251201 by Rome K/G
Replied by Rome K/G on topic Accessory shaft seal
Cat has the 1H5959, formerly 4B4865 , specs. O.D. 2.254, Shaft Dia. 1.438, Width 0.500

Please Log in or Create an account to join the conversation.

More
10 months 19 hours ago #251202 by Old Magnet
Replied by Old Magnet on topic Accessory shaft seal
Might try one of these places for an original...
www.machinerytrader.com/parts/search?Par...865&SearchType=Start
 

Please Log in or Create an account to join the conversation.

More
10 months 18 hours ago #251203 by unstyled
Replied by unstyled on topic Accessory shaft seal
Now that looks like the part I'm after. Ordering it asap, Thanks again!

Please Log in or Create an account to join the conversation.

More
9 months 4 weeks ago #251219 by unstyled
Replied by unstyled on topic Accessory shaft seal
I found 2 original Cat OEM seals from Old Magnet's website he found, bought them both at $5.57 each!

Please Log in or Create an account to join the conversation.

Time to create page: 0.160 seconds
Go to top