- Posts: 38
- Thank you received: 0
ACMOC Membership Benefits
- FREE quarterly magazine filled with content about antique Caterpillar machines
- FREE classified listings
- ACMOC store discounts and specials
- Full Bulletin Board Access
- Marketplace (For Sale/Wanted)
- Technical Library
- Post attachments
$44 /year ELECTRONIC
$60 /year USA
$77 /year International
Pony tank reseal...
15 years 6 months ago #22588
by 66gg1tnc
Rob
'74 Plymouth Voyager PB300 Sportsman
'64 Chrysler 300
'47 Farmall H
Pony tank reseal... was created by 66gg1tnc
Hey Gang.
Delurking for a bit here
I finally got around to re-sealing the pony motor tank on my 112 
(my budget got hit hard over the summer...so the poor thing just sat 
) I used Northern Fuel Tank Sealer from Summit racing. I had already de-rusted the tank (that's when I found the pin holes). Poured it in, gently sloshed it around and drained the excess. Now it's drying. 24 hours I'll know if it doesn't leak anymore!
Next job is installing the exhaust manifold for the pony now that the gaskets are here (thanks Olsons Gaskets!)
Delurking for a bit here
I finally got around to re-sealing the pony motor tank on my 112 (my budget got hit hard over the summer...so the poor thing just sat ) I used Northern Fuel Tank Sealer from Summit racing. I had already de-rusted the tank (that's when I found the pin holes). Poured it in, gently sloshed it around and drained the excess. Now it's drying. 24 hours I'll know if it doesn't leak anymore!
Next job is installing the exhaust manifold for the pony now that the gaskets are here (thanks Olsons Gaskets!)
Rob
'74 Plymouth Voyager PB300 Sportsman
'64 Chrysler 300
'47 Farmall H
Please Log in or Create an account to join the conversation.
Time to create page: 0.117 seconds