acmoc

ACMOC Membership Benefits

  • FREE quarterly magazine filled with content about antique Caterpillar machines
  • FREE classified listings
  • ACMOC store discounts and specials
  • Full Bulletin Board Access
    • Marketplace (For Sale/Wanted)
    • Technical Library
    • Post attachments

$44 /year ELECTRONIC

$60 /year USA

$77 /year International

Engine Turning Tool for D8 2U with D13000 Engine

More
1 year 2 weeks ago #247937 by TD
Makes sense! Thanks a bunch!

Please Log in or Create an account to join the conversation.

More
1 year 2 weeks ago #247951 by Ray54
I have not heard of a tool you could buy to do this, but never looked for one ether. King of Obsolete who posts here at times, I believe had picture on this board of one he made. If I remember correctly he got 2 9u D6's running that had fallen through the ice and sat under water for more than a year. Without taking the engines apart.

Please Log in or Create an account to join the conversation.

More
1 year 2 weeks ago #247958 by Rome K/G
Yea....without taking the engines apart! Listen to how they run too....sheesh!!!!

Please Log in or Create an account to join the conversation.

More
11 months 6 days ago #249195 by HUDCO
i dont think they ever thought somthing like that when a 2u was built i have about six differant ones of flywheel tools like the one shown , you nbetter take the valve cover off first and see how many valves are stuck so you dont bend push rod or valve when it starts to move
The following user(s) said Thank You: TD

Please Log in or Create an account to join the conversation.

More
11 months 6 days ago #249199 by Offrd3717
TD. Direct message me. I have two different tools for turning at flywheel housing thru starter hole. Will help you out. Dale

Twenty Two 2F3717
Cat D6. 2H5695
212 grader X2
3each. D2
3each D4
JD & IHC collector
The following user(s) said Thank You: TD

Please Log in or Create an account to join the conversation.

More
11 months 5 days ago - 11 months 5 days ago #249220 by Offrd3717
    Engine turning tool with starter mounting hole
i have the other type also that is pictured early in this thread. 

Twenty Two 2F3717
Cat D6. 2H5695
212 grader X2
3each. D2
3each D4
JD & IHC collector
Attachments:
Last edit: 11 months 5 days ago by Offrd3717.
The following user(s) said Thank You: TD

Please Log in or Create an account to join the conversation.

More
11 months 5 days ago #249229 by Old Magnet
Those tool wouldn't do you any good on engines with pony motors as the flywheel ring gears are beveled toothed.

Please Log in or Create an account to join the conversation.

More
11 months 5 days ago #249230 by TD
Thanks for the heads-up! I've heard this before. I was sure the teeth on the flywheel were straight. Maybe the flywheel was replaced at some time in the past?

I'm going to have to go back and look at it again. Unfortunately, the machine is an hour away and I only get an hour or two to work on it while my wife visits with a relative.

Please Log in or Create an account to join the conversation.

Time to create page: 0.162 seconds
Go to top