acmoc

ACMOC Membership Benefits

  • FREE quarterly magazine filled with content about antique Caterpillar machines
  • FREE classified listings
  • ACMOC store discounts and specials
  • Full Bulletin Board Access
    • Marketplace (For Sale/Wanted)
    • Technical Library
    • Post attachments

$44 /year ELECTRONIC

$60 /year USA

$77 /year International

D8 1H-8R Carrier rollers

More
7 months 2 weeks ago #250909 by D8Dude
Hi All, 
I'm searching for two carrier rollers to suit a D8 1H or 8R. Any condition considered, I just need something to get my project D8 rolling to move it without scarring up the roller shafts.
Thanks Darren 

Please Log in or Create an account to join the conversation.

More
7 months 2 weeks ago #250925 by Ray54
Replied by Ray54 on topic D8 1H-8R Carrier rollers
I heard stories as I grew up from old timers, in the depression days using blocks of oak wood in place of carrier rollers. A guy using the name King of Obsolete comes here with questions time to time but has a blog under King of Obsolete. He uses wood blocks in the ice and snow of eastern Canada. KOO's blog he has many picture to see how he has done it. But KOO may remove the whole tower, which could be a lot of work just move it around the yard.

Hopefully the real rollers will show up. But something to keep in mind if don't want to wait.

Please Log in or Create an account to join the conversation.

More
7 months 2 weeks ago #250929 by D8Dude
Replied by D8Dude on topic D8 1H-8R Carrier rollers
Thanks for the suggestion Ray, I think removing the towers might be my best option for now, I'd rather put in the extra effort now than to go ahead and move it and cause damage that I will have to fix down the track.

Please Log in or Create an account to join the conversation.

More
7 months 2 weeks ago #250932 by Rome K/G
Replied by Rome K/G on topic D8 1H-8R Carrier rollers
Just the rollers? Are they center mount or offset? Where are you located?

Please Log in or Create an account to join the conversation.

More
7 months 2 weeks ago #250936 by D8Dude
Replied by D8Dude on topic D8 1H-8R Carrier rollers
I'm in need of the entire roller assembly, all I have is the pedestals but the are missing the rollers. They're the offset type that carried through to the 8R, 2U, 13A. My part number is the 9B565, the type that is held on the shaft with three cap screws. I don't know whether these are interchangeable with the type that are held on by a nut threaded onto the roller shaft. I'm located in Victoria, Australia.
Thanks

Please Log in or Create an account to join the conversation.

More
7 months 1 week ago #251012 by Andrew
Replied by Andrew on topic D8 1H-8R Carrier rollers
I have some D8 parts including rollers here in Queensland .
0428717065
A. K.

Please Log in or Create an account to join the conversation.

Time to create page: 0.150 seconds
Go to top