acmoc

ACMOC Membership Benefits

  • FREE quarterly magazine filled with content about antique Caterpillar machines
  • FREE classified listings
  • ACMOC store discounts and specials
  • Full Bulletin Board Access
    • Marketplace (For Sale/Wanted)
    • Technical Library
    • Post attachments

$44 /year ELECTRONIC

$60 /year USA

$77 /year International

WTB air cleaner parts for a 22

More
9 months 1 week ago #250988 by GrantJ
I am in need of the bottom cup assembly for my 22. Mine has enough pin holes in it to make a shower head. If I cant find a good one I will try soldering it but have not had good luck doing that before. I also need the pipe that bolts to the top of the cleaner and goes straight down to the rubber connecter  that goes to the carb elbow. It is a straight pipe with a flange on one end.

Cup part number  1B1997,   pipe part number 2B2185.                                Any help will be appreciated.   Grant.

Please Log in or Create an account to join the conversation.

More
9 months 1 week ago #251011 by Lance Jones
I had same problem a few Months ago,, no luck getting one so I bead blasted it and lined it with Fibreglass,, put a couple Layers on ,Buffed it down Fine sand paper and it came up great and works Perfect , have another to do when I get a spare Minute.. I will have a look I may have a spare Pipe , But Postage to USA is Ridiculous and even Worse USA to Australia. LJ

Please Log in or Create an account to join the conversation.

More
9 months 1 week ago #251025 by GrantJ
Hi Lance, I have also been thinking of doing an epoxy coating on the inside. That may be the solution. I am in Northern California so if you are down under, postage would probably be horrible. A friend thinks he may have a line on one much nearer. I will see what happens. Thanks, Grant.

Please Log in or Create an account to join the conversation.

More
9 months 1 week ago #251052 by GrantJ
The local option didnt turn out. I did not realize that only the first 2300 or so of 22s had this particular air cleaner. I have 2F340, so it is very early.

Still hoping but will try the epoxy trick and see how that comes out. Thanks, Grant.

Please Log in or Create an account to join the conversation.

More
9 months 1 week ago #251056 by Rome K/G
Media blast and JB Weld it.

Please Log in or Create an account to join the conversation.

More
8 months 3 weeks ago #251488 by swifty
I have air cleaner, bottom seems to be in good shape top pipe is broke off but could be fixed or maybe yours is good ,has side pipe that uses 4 bolts to attach pipe going to carb,
Attachments:

Please Log in or Create an account to join the conversation.

More
8 months 1 week ago #251686 by brewzer
I think I have your pipe..i'll check. PM me.

Please Log in or Create an account to join the conversation.

More
8 months 1 week ago #251721 by GrantJ
Swifty, could you take the bottom off and see if you can see light thru it. Mine looks like a shotgun hit it. Also please measure the diameter. I am interested. I have the pipe that goes to the carb. The one that comes down from the top has a two bolt flange.

Brewzer, If it is the pipe with a two bolt flange, I am interested. I love the help on this site. Grant.

Please Log in or Create an account to join the conversation.

More
8 months 1 week ago #251734 by swifty
Mine is different my pipe has 4 bolts ,2long 2 short that hold pipe on.

Please Log in or Create an account to join the conversation.

More
8 months 1 week ago #251735 by swifty
  Mine is different my pipe has 4 bolts ,2long 2 short that hold pipe on.
Attachments:

Please Log in or Create an account to join the conversation.

Time to create page: 0.185 seconds
Go to top